Konica Minolta bizhub C652DS 用户手册

bizhub C652/C652DS/C552/C552DS/C452

7-15

d

To adjust the half-fold position:

Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö 
[Finisher Adjustment] ö [Half-Fold Position].

Adjust the center staple & fold and half-fold positions.

0

Before making any adjustments, create a sample using the half-fold function. Adjust the half-fold 
position while checking the created sample.

0

It can be adjusted only when the saddle sticher is installed.

0

When adjusting the half-fold position in parallel with the left edge of paper, contact your service 
representative.

Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] 
ö [Finisher Adjustment] ö [Half-Fold Position].

Select the size of paper of which half-fold position is adjusted.

Press [+] or [-] to adjust the punched hole position while checking the sample.

Press [OK].

Create a sample, and check the print result.

Adjust the folding position for each paper size when printing with the tri-fold function. The folding width 
depends on the paper size, which cannot be changed.

0

Before making any adjustments, create a sample using the tri-fold function. Adjust the tri-fold position 
while checking the created sample.

0

It can be adjusted when the Finisher FS-526 and Saddle Stitcher SD-508 are installed.

Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] 
ö [Finisher Adjustment] ö [Tri-Fold Position Adjustment].

Select the size of paper of which tri-fold position is adjusted.

Press [+] or [-] to adjust the tri-fold position while checking the sample.

Press [OK].

Create a sample, and check the print result.