Cisco FL-GK-NEW-3745= 用户手册
2-35
Getting Started with Cisco Hosted Unified Communication Services
OL-15490-01
Chapter 2 Configuring Hosted Unified Communications Services Components Before Loading Bulk Data
Applying Static Configuration to the Cisco H.323 Gatekeeper
Example 2-13 CLIP/CLIR support
prov-add:name=SYS_CONFIG_STATIC,ClipClirSupported=enabled
prov-add:name=CCPackage,A_CC_AnumDataSI=1
prov-add:name=CCPackage,A_CC_Clir=1
Applying Static Configuration to the Cisco H.323
Gatekeeper
Gatekeeper
This section explains how to apply the static configuration to the Cisco H.323
gatekeeper. This is required before using BVSM to load the bulk data that
integrates the Cisco H.323 Gatekeeper into the Hosted UCS platform.
gatekeeper. This is required before using BVSM to load the bulk data that
integrates the Cisco H.323 Gatekeeper into the Hosted UCS platform.
An H.323 gatekeeper is included in the Hosted UCS platform to provide basic
infrastructure capabilities. It provides registration capability for the Cisco PGW
(through the Cisco HSI), Cisco Unified CM, and any H.323 customer devices. The
gatekeeper forces all routing to use the Cisco PGW rather than to operate between
Cisco Unified CM clusters.
infrastructure capabilities. It provides registration capability for the Cisco PGW
(through the Cisco HSI), Cisco Unified CM, and any H.323 customer devices. The
gatekeeper forces all routing to use the Cisco PGW rather than to operate between
Cisco Unified CM clusters.
Configure the following static configuration settings on the gatekeepers in global
configuration mode:
configuration mode:
Example 2-14 Gatekeeper Static Configuration
gatekeeper
zone local HUCS_ZONE cisco.com
gw-type-prefix 999#* default-technology
no shutdown