DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC 数据表

©

 2014 DJI. All Rights Reserved. 

Aircraft

INSPIRE 1

  User Manual

There are two options for Dynamic Home Point.

1. Set the aircraft current coordinate as the new Home Point. 

2. Set the remote controller’s coordinate as the new Home Point. 

Setting Up Dynamic Home Point

Follow the steps below to setup Dynamic Home Point:

1. Connect to the mobile device and launch the DJI Pilot app and go to the “Camera” page.
2. Tap“ ”and select“ ”, to reset the remote controller’s coordinates as the new Home Point.

3. Tap“ ”and select“ ”, to reset the aircraft’s coordinates as the new Home Point.

4. The aircraft status indicator blinks green to show Home Point is set succesfully.

Vision Positioning System

DJI Vision Positioning is a positioning system that uses ultrasonic and image data to help the aircraft 

identify its current position. With the help of Vision Positioning, your Inspire 1 can hover in place more 

precisely and fly indoors or in other environments where there is no GPS signal available. The main 

components of DJI Vision Positioning are located on the bottom of your Inspire 1, including [1]two sonar 

sensors and[2]one monocular camera. 

Using Vision Positioning 

Vision Positioning is activated automatically when the Inspire 1 is powered on. No manual action is 

required. Vision Positioning is typically used in the indoor environment where no GPS is available. By 

using the sensors on the Vision Positioning system, Inspire 1 can perform precision hovering even when 

no GPS is available. 

[1]

[2]