Nxp Semiconductors LPC2194HBD64,151 ARM7 Microcontroller 16kB LQFP 64 LPC2194HBD64,151 数据表
产品代码
LPC2194HBD64,151
LPC2194_4
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 04 — 11 September 2006
19 of 36
Philips Semiconductors
LPC2194
Single-chip 16/32-bit microcontroller
•
Bidirectional data transfer between masters and slaves.
•
Multi-master bus (no central master).
•
Arbitration between simultaneously transmitting masters without corruption of serial
data on the bus.
data on the bus.
•
Serial clock synchronization allows devices with different bit rates to communicate via
one serial bus.
one serial bus.
•
Serial clock synchronization can be used as a handshake mechanism to suspend and
resume serial transfer.
resume serial transfer.
•
The I
2
C-bus may be used for test and diagnostic purposes.
6.15 SPI serial I/O controller
The LPC2194 each contain two SPIs. The SPI is a full duplex serial interface, designed to
be able to handle multiple masters and slaves connected to a given bus. Only a single
master and a single slave can communicate on the interface during a given data transfer.
During a data transfer the master always sends a byte of data to the slave, and the slave
always sends a byte of data to the master.
be able to handle multiple masters and slaves connected to a given bus. Only a single
master and a single slave can communicate on the interface during a given data transfer.
During a data transfer the master always sends a byte of data to the slave, and the slave
always sends a byte of data to the master.
6.15.1 Features
•
Compliant with Serial Peripheral Interface (SPI) specification.
•
Synchronous, Serial, Full Duplex, Communication.
•
Combined SPI master and slave.
•
Maximum data bit rate of
1
⁄
8
of the input clock rate.
6.16 General purpose timers
The Timer is designed to count cycles of the peripheral clock (PCLK) and optionally
generate interrupts or perform other actions at specified timer values, based on four
match registers. It also includes four capture inputs to trap the timer value when an input
signal transitions, optionally generating an interrupt. Multiple pins can be selected to
perform a single capture or match function, providing an application with ‘or’ and ‘and’, as
well as ‘broadcast’ functions among them.
generate interrupts or perform other actions at specified timer values, based on four
match registers. It also includes four capture inputs to trap the timer value when an input
signal transitions, optionally generating an interrupt. Multiple pins can be selected to
perform a single capture or match function, providing an application with ‘or’ and ‘and’, as
well as ‘broadcast’ functions among them.
6.16.1 Features
•
A 32-bit Timer/Counter with a programmable 32-bit Prescaler.
•
Four 32-bit capture channels per timer that can take a snapshot of the timer value
when an input signal transitions. A capture event may also optionally generate an
interrupt.
when an input signal transitions. A capture event may also optionally generate an
interrupt.
•
Four 32-bit match registers that allow:
– Continuous operation with optional interrupt generation on match.
– Stop timer on match with optional interrupt generation.
– Reset timer on match with optional interrupt generation.