Olimex Web server TCP-IP development board PIC microcontrollers with UEXT connector PIC-WEB PIC-WEB 用户手册
产品代码
PIC-WEB
INTRODUCTION
PIC-WEB is a compact (65x60 mm) board which is supported by Microchip’s
open source TCP-IP stack AN833. The board is designed with 64-pin high-performance, 1
Mbit Flash microcontroller with Ethernet - PIC18F67J60 and supports: SLIP, ARP, IP,
ICMP, TCP, UDP, HTTP, DHCP, FTP. The Microchip stack is written very modular and
flexible and you can enable or disable modules and supports dynamic web pages which give
you the possibility to control all PIC resources remotely via FTP, HTTP, UDP, TCP etc.
With this board you can implement web and ftp server, send e-mails and almost everything
what the big servers do. The on board 1Mbit serial flash is available for data storage.
Mbit Flash microcontroller with Ethernet - PIC18F67J60 and supports: SLIP, ARP, IP,
ICMP, TCP, UDP, HTTP, DHCP, FTP. The Microchip stack is written very modular and
flexible and you can enable or disable modules and supports dynamic web pages which give
you the possibility to control all PIC resources remotely via FTP, HTTP, UDP, TCP etc.
With this board you can implement web and ftp server, send e-mails and almost everything
what the big servers do. The on board 1Mbit serial flash is available for data storage.
This board is designed to have Web page of no more than 128 kB. If you want a lot
of images in your application you can also host them on other server visible on the network
where you have the PIC-WEB connected. The potential of the board is to generate a fluid
communication between some specific sensors or actuators across a TCP/IP net including
the controls of it.
where you have the PIC-WEB connected. The potential of the board is to generate a fluid
communication between some specific sensors or actuators across a TCP/IP net including
the controls of it.
The Microchip stack is an open source library, which is possible to modify and
compile at any time. But you will probably need to modify it to your own needs. The board
comes with an implemented WEB server and a web page that let you controls some of the
features of the board. In this manual we’ll learn about how to compile the TCP/IP stack to
use it over the platform, the needed software, how to use the pre loaded web page, and how
to upload your own web pages in the board.
comes with an implemented WEB server and a web page that let you controls some of the
features of the board. In this manual we’ll learn about how to compile the TCP/IP stack to
use it over the platform, the needed software, how to use the pre loaded web page, and how
to upload your own web pages in the board.
This manual requires Microsoft Windows© OS because several software units used
here are Windows compatible only.
BOARD FEATURES
PIC18F67J60 microcontroller
1Mbit on board serial flash for web pages storage
ICSP/ICD mini connector for programming and debugging with PIC-ICD2, PIC-
ICD2-POCKET and PIC-ICD2-TINY.
ICD2-POCKET and PIC-ICD2-TINY.
Reset button
User event button
Analogue trimmer potentiometer
Thermistor for temperature monitoring
RS232 driver and connector
Complete web server and TCP-IP stack support as per Microchip's open source
TCP-IP stack
TCP-IP stack
Power plug-in jack for +9 to +12 VDC power supply
Voltage regulator +3.3V and filtering capacitors
status LED
UEXT connector
Extension header to connect to other boards
PCB: FR-4, 1.5 mm (0,062"), solder mask, silkscreen component print
Dimensions (60x65)mm ~ (2.36x2.55)"
Page 2 of 36