Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Enter/Exit Programming Mode

270

PowerScan™ PD9530/PBT9500/PM9500

Sets the identifier for keyboard composed strings. 

$CPWEC

Set keys sequence ID

To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at 
left followed by 6 digits from 

The ID characters must be represented by their hexadeci-
mal ASCII code; if the first 2 digits are 0, this feature is dis-
abled. End by scanning the ENTER/EXIT bar code again.

 

Sets the header for keyboard composed strings.

$CPWE1

Set key sequence header

To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at 
left followed by 32 digits from the Alphanumeric char-
acters in 

the hexadecimal ASCII representation of the desired 
characters. 

If less than the expected string of 16 characters are 
selected, scan the ENTER/EXIT bar code to terminate 
the string. 

If the first 2 digits are 0, the feature is disabled. End by 
scanning the ENTER/EXIT bar code again.

Sets the terminator for keyboard composed strings.

$CPWE2

Set key sequence terminator

To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at 
left followed by 32 digits from the Alphanumeric char-
acters in 

the hexadecimal ASCII representation of the desired 
characters. 

If less than the expected string of 16 characters are 
selected, scan the ENTER/EXIT bar code to terminate 
the string. 

If the first 2 digits are 0, the feature is disabled. End by 
scanning the ENTER/EXIT bar code again.