Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Enter/Exit Programming Mode

268

PowerScan™ PD9530/PBT9500/PM9500

This item allows the user to change the default mnemonic label associated 

to each individual function key. This is done by programming a short acro-

nym 4-character string to be shown in the bottom of the display. The pur-

pose of the label is to serve as an indication of the programmed function of 

the Function Key below it. 

$CPWSD

Set F3 label

To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at 
left followed by 8 digits from the 

. The digits must be the hexadecimal ASCII represen-

tation of the desired characters. 

End by scanning the ENTER/EXIT bar code again.

This item allows the user to change the default mnemonic label associated 

to each individual function key. This is done by programming a short acro-

nym 4-character string to be shown in the bottom of the display. The pur-

pose of the label is to serve as an indication of the programmed function of 

the Function Key below it. 

$CPWSE

Set F4 label

To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at 
left followed by 8 digits from the 

. The digits must be the hexadecimal ASCII represen-

tation of the desired characters. 

End by scanning the ENTER/EXIT bar code again.