Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Enter/Exit Programming Mode

Product Reference Guide

                           269

If this parameter is enabled, barcode and keyboard entered data can be for-

matted separately. More specifically: if this parameter is disabled, barcode 

and keyboard data will share the same Header and Terminator defined using 

“Set Barcode Header” and “Set Barcode Terminator” below. If this parameter 

is enabled, keyboard entered data are treated differently, as their format 

must be programmed through the parameters 

. 

$CPWDF00\r

Disable

DEFAULT

$CPWDF01\r

Enable

Sets the header for barcode and keyboard composed strings.

$CPWBH

Set barcode header

To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at 
left followed by 32 digits from the Alphanumeric charac-
ters in 

. The digits must be the 

hexadecimal ASCII representation of the desired charac-
ters. 

If less than the expected string of 16 characters are 
selected, scan the ENTER/EXIT bar code to terminate the 
string.  If the first 2 digits are 0, the feature is disabled. 
End by scanning the ENTER/EXIT bar code again.

Sets the terminator for barcode and keyboard composed strings.

$CPWBT

Set barcode terminator

To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at 
left followed by 32 digits from the Alphanumeric charac-
ters in 

. The digits must be the 

hexadecimal ASCII representation of the desired charac-
ters. 

If less than the expected string of 16 characters are 
selected, scan the ENTER/EXIT bar code to terminate the 
string.  If the first 2 digits are 0, the feature is disabled. 
End by scanning the ENTER/EXIT bar code again.