Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Data Editing

Product Reference Guide

                           293

Character conversion is an eight byte configuration item. The eight bytes are 

4 character pairs represented in hexadecimal ASCII values. The first charac-

ter in the pair is the character that will be converted. The second character in 

the pair is the character to convert to. If the character to convert in a pair is 

FF, then no conversion is done.
For example, if you have the character conversion configuration item set to 

the following: 41423132FFFFFFFF
The first pair is 4142 or AB (41 hex is an ASCII capital A, 42 hex is an ASCII 

capital B) and the second pair is 3132 or 12 (31 hex is an ASCII 1, 32 is an 

ASCII 2). The other two pairs are FFFF and FFFF.
With the label, AB12BA21, it would look as follows after the character con-

version: BB22BB22.
The A characters were converted to B characters and the 1 characters were 

converted to 2 characters. Nothing is done with the last two character pairs, 

since they are all FF.
To set Character Conversion:

1. Go to 

 and scan the ENTER/EXIT bar code.

2. Scan the “Configure Character Conversion” bar code.
3. Determine the desired string. Sixteen positions must be determined as 

in the above example. Next, turn to the 

 on the inside back 

cover of this manual and find the equivalent hex digits needed to fulfill 

the string.

4. Turn to 

 and scan the bar codes representing the 

hex characters determined in the previous step.

5. Scan the ENTER/EXIT bar code to exit Programming Mode.