KVH Industries TracVisionM7 用户手册

In Step 3, you identified a suitable mounting
location for the switchplate and cut out the
mounting hole in the mounting surface. Now
follow these steps to mount the switchplate.

a. Fit the switchplate assembly into the

mounting hole until it is flush with the

mounting surface.

b. Drill four 5/32" (4 mm) holes in the

countersunk settings in the switchplate’s

support frame (see Figure 21).

c. Secure the support frame and switchplate

assembly to the mounting surface using four

#6 screws.

d. Snap the front cover onto the switchplate to

conceal the mounting screws and support

frame.

Switchplate

5/32" ( 4 mm)

Mounting Hole (x4)

#6 Screw (x4)

Front Cover

Mounting Surface

Figure 21: Mounting the Switchplate

Mount the Switchplate