Black & Decker Trimmer LPHT120B 用户手册

IMporTANT: To assure product SAFETY and RELIABILITY, 

repairs, maintenance and adjustment should be performed by 

authorized service centers or other qualified service organizations, 

always using identical replacement parts.

 wArNINg:  do NoT use the Pole Trimmer with any type of 

accessory or attachment. Such usage might be hazardous.
THe rBrC™ SeAL

The RBRC™ (Rechargeable Battery Recycling 

Corporation) Seal on the LI-ION battery (or battery 

pack) indicates that the costs to recycle the battery (or 

battery pack) at the end of its useful life have already 

been paid by Black & decker.

RBRC™ in cooperation with Black & decker and other battery users, 

has established programs in the United States to facilitate the collection 

of spent LI-ION batteries. Help protect our environment and conserve 

natural resources by returning the spent LI-ION battery to an authorized 

Black & decker service center or to your local retailer for recycling. 

You may also contact your local recycling center for information on 

where to drop off the spent battery.  

RBRC™ 

is a registered trademark 

of the Rechargeable Battery Recycling Corporation

.

The cutting blades are made from high quality, hardened steel and 

with normal usage, they will not require resharpening. However, if 

you accidentally hit a wire fence, stones, glass or other hard objects, 

you may put a nick in the blade. There is no need to remove this 

nick as long as it does not interfere with the movement of the blade. 

If it does interfere, remove the battery from the unit and use a fine 

toothed file or sharpening stone to remove the nick.

If you drop the trimmer, carefully inspect it for damage. If the blade 

is bent, housing cracked, or if you see any other condition that may 

affect the trimmer’s operation contact your local Black & Decker 

Service Center for repairs before putting it back into use.

Always be sure of your footing and grip the 

Pole Trimmer firmly with both hands with 

the thumb and fingers encircling the handle.

To turn the tool ON pull the lock button (1)  

back with your thumb and then squeeze  

the trigger (2) with your fingers as shown  

in figure 14. (Once the tool is running you  

can release the lock button.) To turn the  

tool OFF, release the trigger. 

1.   workINg poSITIoN - Maintain proper footing and balance 

and do not overreach. Wear safety goggles, non-skid footwear

and gloves when trimming. Hold the tool firmly in both hands 

and turn the tool ON. Always hold the trimmer, as shown in the 

illustrations in this manual, with one hand on the switch handle 

and one hand on the pole. Never hold the tool by the hand guard.

2.   TrIMMINg New growTH - A wide, sweeping motion, feeding 

the blade teeth through the twigs is most effective. A slight 

downward tilt of the blade, in the direction of motion gives the 

best cutting. Do not cut stems greater than 3/8” (10mm). Use 

the trimmer only for cutting normal shrubbery around houses 

and buildings.

3.   LeVeL HedgeS - To obtain exceptionally level hedges 

a piece of string can be stretched along the length of the hedge 

as a guide.

4.   SIde-TrIMMINg HedgeS - Begin at the bottom and sweep up.

wArNINg:  TO GUARD AGAINST INJURY, OBSERVE THE 

FOllOWiNG:

• reAd ANd UNderSTANd INSTrUCTIoN MANUAL Before 

• SAVe INSTrUCTIoN MANUAL.

• keep HANdS AwAy froM BLAdeS.

• keep HANdS oN HANdLe ANd poLe. doN’T oVerreACH.

• BLAde CoASTS AfTer TUrN off. 

• do NoT USe UNder weT CoNdITIoNS.

14