Black & Decker Trimmer LPHT120B 用户手册

The trimmer head pivots 180 degrees and can be locked into 5 

different positions within that range. To avoid being pinched, wear 

gloves and hold unit as shown below.

Before connecting the battery to the unit, be sure the trimmer head is 

locked into position.

To pivot the trimmer head:

1.   Press in on the locking latch (7) and raise the trimmer head as 

shown in figure 11.

2.   Lock the trimmer head into any 

of the 5 positions. Check to make 

sure that trimmer head is locked 

into position by trying to move the 

motor housing. If it is not locked, 

rotate it to the closest lock position.

With its unique design the trimmer

can be used to trim and shape hard 

to reach areas of hedges and bushes 

such as those shown in fig. 12 and 13.

11

12

13

before performing the following operations.  Failure to do this 

could result in serious personal injury. 

When detaching the modules rest the handle module

on the ground and grasp 

the center of the trimmer 

head module with one 

hand figure 7. Use your 

other hand to loosen the 

threaded sleeve figure 

8 and then pull the two 

halves apart. 

wArNINg: read and understand all instructions. Failure to 

follow all instructions listed below may result in electric shock, fire 

and/or serious personal injury.

Place the battery in the tool as shown in figure 9 and be certain that 

it is inserted fully into the tool cavity until it “clicks” into place. To 

remove the battery from the tool, press down on the release button 

on the back of the battery (figure 10) and slide out.

7

8

10

9