Black & Decker Trimmer LPHT120B 用户手册

before performing the following operations.  Failure to do this 

could result in serious personal injury. 

Combining the handle module (A) to the trimmer head module (B) 

creates a pole trimmer that is approximately 6 foot in length as shown 

in figure 3. 

To attach the handle module to the trimmer head module:

1.   Align the groove on the outside of 

the coupling end of the handle module 

(A) with the tongue on the inside of 

the coupling end of the trimmer head 

module (B). See  

figure 4. Push the two sections 

completely together.

2.   Slide the threaded sleeve (6) figure 5 

on the trimmer head module down as 

far as possible and rotate the sleeve 

clockwise until it stops and completely 

covers the orange threads as shown in 

figure 6.

 

threads are no longer visible. Not 

threading the sleeve completely on could 

result in the modules becoming disconnected creating a hazardous 

condition. Periodically check the connections to insure that no 

orange threads are visible.

Groove

4

5

6

3

Always remove the battery from the handle and cover the blade with 

the blade sheath when transporting the Pole Trimmer. See page 6 for 

additional information on transporting the battery.

TO iNSTAll BATTerY PACK: Insert battery pack into tool until an 

audible click is heard (figure 2).

TO reMOve BATTerY PACK: Depress the battery release button 

in the back of the battery pack and pull battery pack out of tool 

(figure 2).