Canon DP-V3010 说明手册
79
Error Messages
Message
Description and Action
Operation
Invalid operation.
F buttons will not function in the following cases:
• When the following function is set during
• When the following function is set during
DisplayPort signal selection:
- H Delay/V Delay
- Time Code
- Time Code
• When the following function is set while "Input
Configuration" is not performed for the selected
channel:
channel:
- Time Code
• When the following function is set while "H
Delay"/"V Delay" is set:
- Screen Scaling
- Aspect Marker
- Safety Zone Marker
- Peaking 1/Peaking 2
- Aspect Marker
- Safety Zone Marker
- Peaking 1/Peaking 2
• When the following function is set while
"Peaking 1"/"Peaking 2" is set:
- Aspect Marker
- Safety Zone Marker
- Center Marker
- Grid Marker
- H Delay/V Delay
- Time Code
- Safety Zone Marker
- Center Marker
- Grid Marker
- H Delay/V Delay
- Time Code
"Protect Settings" is on.
To use the OSD menu, move the selection frame
to "Protect Settings" and press the SET button for
approximately 3 seconds.
to "Protect Settings" and press the SET button for
approximately 3 seconds.
"CDL Override" is on.
When "CDL Override" is turned "On", you cannot
adjust the "POWER", "SATURATION", "OFFSET", or
"SLOPE".
adjust the "POWER", "SATURATION", "OFFSET", or
"SLOPE".
"Knob Lock" is on.
If the knobs are not functioning, please set "Knob
Lock" to "OFF".
Lock" to "OFF".
USB memory
USB memory is not connected.
Correctly connect the USB memory to the USB port
of this main unit.
of this main unit.
Unsupported USB memory.
Check the USB memory format and make sure it is
not protected.
not protected.
COP
Y