Capital MWD30ES 使用和维护
- -
5
WARMING DRAWER FEATURES DEFINED
1. Control SET Button:
a. The SET button activates the Warming Drawer and activates the Temperature set mode when
pressed once if it is in and Idle (Off) state, when pressed a second time the SET button activates
the Timer set mode, when pressed a third time the SET button turns the Warming Drawer OFF.
the Timer set mode, when pressed a third time the SET button turns the Warming Drawer OFF.
2. Control UP Button
a. The UP button is used to increase the Temperature or Timer setting.
b. A quick press of the UP button when in the Temperature mode will increase the setting to the
b. A quick press of the UP button when in the Temperature mode will increase the setting to the
next preset level.
c. Pressing and holding the UP button when in Temperature mode will allow the preset to be
adjusted to your custom setting. This setting will be retained for future uses as one of the four
preset temperatures.
preset temperatures.
d. A quick press of the UP button when in the Timer mode will increase the Timer setting to the next
15 minute increment.
e. Settings are available from 15 minutes to 4 hours or the Warming Drawer may be set to be
continuously On.
3. Control DOWN Button
a. The DOWN button is used to decrease the Temperature or Timer setting.
b. A quick press of the DOWN button when in the Temperature mode will decrease the setting to the
b. A quick press of the DOWN button when in the Temperature mode will decrease the setting to the
next preset level.
c. Pressing and holding the DOWN button when in Temperature mode will allow the preset to be
adjusted to your custom setting. This setting will be retained for future uses as one of the four
preset temperatures.
preset temperatures.
d. A quick press of the DOWN button when in the Timer mode will decrease the Timer setting to the
next 15 minute increment.
e. Settings are available from 15 minutes to 4 hours or the Warming Drawer may be set to be
continuously On.
4. Moist Slider
a. The Moist slide opens and closes vents in the drawer front.
b. When the vents are closed moisture evaporated from food will be retained within the drawer and
b. When the vents are closed moisture evaporated from food will be retained within the drawer and
reduce drying of heated foods.
c. When vents are open moisture is allowed to escape from the drawer.
5. Cabinet Mounting Holes
a. Mounting holes are located on the Front Stainless Panel and are used to secure the Warming
Drawer to the cabinet.
6. Door Gasket
a. The Door Gasket is used to retain heat and moisture within the Warming Drawer.
7. Heating Element
a. A Heating Element is located above the drawer interior.
8. Temperature Sensor
a. The temperature sensor reads the Warming Drawer interior temperature.
9. Serial Number Label
The serial number is required for any service or warranty calls.