Capital MWD30ES 使用和维护

-  - 

7

 

1.  Pressing the SET button when is the control is off will actuate the Temperature Set mode. 
2.  Pressing the SET button a second time when the control is active will actuate the Timer Set mode. 
3.  Pressing the SET button a third time will turn the Warming Drawer Timer to CONTINUOUS. This will turn 

the drawer ON until it is turned OFF by the user. 

4.  Four temperature settings are available and adjustable. The preset Temperatures are 110, 145, 170, and 

200.All MODE icons will illuminate. 

1.  After entering the Temperature SET mode, press the UP or DOWN arrow button to adjust the 

temperature preset. 

2.  After changing a temperature preset the temperature will be retained in memory and will be used as a 

preset until changed. 

3.  Once a temperature preset has been changed the drawer will maintain that temperature. 

1.  After entering the Timer SET mode, press the UP or DOWN arrow button to adjust the temperature 

preset. 

2.  The Timer will adjust in 15 minute increments from 15 minutes up to 4 hours. 
3.  The Timer can be reset or increased at any time by pressing the SET button to enter the Timer mode and 

pressing the UP or DOWN buttons to adjust the Timer setting. 

1.  When the SET button is pressed for a fourth time when active, “Cont” will be displayed. 
2.  Cont indicates the Warming Drawer is operating in Continuous ON mode. This mode will maintain the 

temperature setting until the Warming Drawer is turned OFF by the user. 

 

1.  To turn the Warming Drawer OFF, press the SET button until the display turns OFF.