Viking RVCH330X 安装指导

Table of Contents

Warnings & Important Information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3
RVCH Classic Chimney Wall Hoods w/Standard Ventilator

Dimensions & Specifications_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Clearance Dimensions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6
Interior Ventilator Dimensions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7

Planning Information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Installation Procedure

Installation  (RVCH  Classic  Chimney  Wall  Hoods  w/Standard  Ventilator) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  9
Duct  Cover  (RVCH  Classic  Chimney  Wall  Hoods  w/Standard  Ventilator)_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  11
Installation  (RVCH  Classic  Chimney  Wall  Hoods  w/Recirculating  Kit) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  12

Service & Registration _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15

IMPORTANT–

Please Read and Follow!

NOTE:

If installing hood with warming shelf panel,

install warming shelf panel first.

IMPORTANT – PLEASE READ AND FOLLOW
• Before beginning, please read these instructions

completely and carefully.

• DO NOT remove permanently affixed labels,

warnings, or plates from the product. This may
void the warranty.

• Please observe all local and national codes and

ordinances. If no local codes are applicable, wire
in accordance with the National Electrical Code,
ANSI/NFPA 70-latest edition.

• The installer should leave these instructions with

the consumer who should retain for local
inspector’s use and for future reference.

• Check with a qualified and trained installer or local

codes for makeup air requirement, if any.

This hood is for residential installation only and is
not designed for installation over a commercial
product. Make sure power is off at the main circuit
breaker or fuse box before making connections. To
avoid risk of fire, electric shock, or injury to persons,
turn off the electricity to the hood from the power
supply before servicing or cleaning.

Viking hoods are equipped with the variable speed
controls for blowers. These units will not function
with a single speed ventilator. All Viking ventilator
kits are designed specifically for use with Viking
hoods. Use of any non-Viking ventilator kit will void
the hood warranty.

READ AND SAVE THESE INSTRUCTIONS

W A R N I N G

TO REDUCE THE RISK OF A RANGETOP
GREASE FIRE
1. Never leave surface units unattended at

high setting. Boilovers cause smoking and
greasy spillovers that may ignite. Heat oils
slowly on low or medium settings.

2. Always turn hood ON when cooking at

high heat or when cooking flaming foods.
(i.e. crepes suzette, cherries jubilee,
peppercorn beef flambé).

3. Clean ventilating fans frequently. Grease

should not be allowed to accumulate on
fan or filter.

4. Use proper pan size. Always use

cookware appropriate for the size of the
surface element.

TO REDUCE THE RISK OF FIRE, ELECTRICAL
SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING
1. Installation work and electrical wiring must be

done by qualified person(s) in accordance with
all applicable codes and standards, including
fire-rated construction.

2. Sufficient air is needed for proper combustion

and exhausting of gases through the flute
(chimney) of fuel burning equipment to prevent
back drafting. Follow the heating equipment
manufacturer’s guideline and safety standards
such as those published by the National Fire
Protection Association (NFPA), and the
American Society for Heating, Refrigeration and
Air Conditioning Engineers (ASHRAE), and the
local code authorities.

3. When cutting or drilling into wall or ceiling, do

not damage electrical wiring or other hidden
utilities.

4. Ducted fans must always be vented to the

outdoors.

5. WARNING!: To reduce risk of fire, use only

metal ductwork.

6. CAUTION!: To reduce risk of fire and to

properly exhaust air, be sure to duct air outside.
Do not vent exhaust air into spaces within walls
or ceilings, or into attics, crawl spaces, or
garages.

7. CAUTION!: To Reduce the Risk of Fire and

Electric Shock, Install this range hood only with
remote blower models manufactured by Viking,
model numbers – DEV900/DEV1200,
VEV900/VEV1200, OR DEV1500, VEV1500 or
integral blowers manufactured by Viking, model
numbers – DIV300, DIV440, DIV600, DIV800,
DIV1200, VIV300, VIV600, or VIV1200.
NOTE – Please refer inside for specific
canopy/blower combinations.

W A R N I N G

TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING
• Use this unit only in the manner intended by the

manufacturer. If you have any questions, contact
the manufacturer.

• Before servicing or cleaning unit, switch power off

at service panel and lock service panel to prevent
power from being switched on accidentally. When
the service disconnecting means cannot be
locked, securely fasten a prominent warning
device, such as a tag, to the service panel.