Dacor ERV3615 安装指导

5.  Gently slide the vent into the rear of the countertop cut-

out with the electrical access panel toward the front.

6.  Loosely attach the anchoring legs to the studs on the 

left and right sides of the raised vent using the provided 

keps nuts and washers.

7.  Adjust the anchoring leg height so that the end caps 

are gently resting on the counter, then tighten the hex 

nuts. 

8.  Secure the anchoring legs to the cabinet floor with the 

provided wood screws.

Installation Instructions

Put nuts/

washers on 

studs

Attach to 

floor with 

wood 

screws

Front of 

raised vent

Floor

Top of vent resting 

on countertop

Electrical access 

panel

Anchor leg

Installing the Blower and Ducts

1.  Install the remote or in-line blower according to the 

blower installation instructions. 

2.  Install the duct work according to the Installation 

Specifications section. Use sheet metal screws and 

duct tape to connect and seal all of the pieces. Support 

the duct weight as necessary to ensure sealed joints.

REMP series 

remote blower

3 ¼” X 10” to 

round transition 

and 45° 

adjustable elbow

Duct work between 

raised vent and 

remote blower

Wall board

Cooktop

Backsplash

Raised vent

Raised vent 

configured for 

rear exhaust

Floor

Wiring/conduit 

from raised vent 

to remote blower