Xerox 8855 用户手册
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide
31
Making copies
When the Graphical Display indicates READY TO COPY, the Synergix Digital
Solution is ready to make copies.
Solution is ready to make copies.
Controlling the scan
Several settings are available for controlling how the Scanner starts and
finishes a scan. These settings are accessible from the SCANNER
CONTROL option of the CONFIGURATION menu.
finishes a scan. These settings are accessible from the SCANNER
CONTROL option of the CONFIGURATION menu.
When making a copy, you need to be aware of these settings. If any of these
settings have been changed from the default settings, the Scanner may not
operate according to your expectations.
settings have been changed from the default settings, the Scanner may not
operate according to your expectations.
Below is a brief summary of the scan control settings. For complete
information about these settings, refer to "Scanner Control" in the "Main
Menu" section.
information about these settings, refer to "Scanner Control" in the "Main
Menu" section.
DOCUMENT RETURN
FRONT is the default setting. When the DOCUMENT RETURN feature is
set to FRONT, the Scanner returns the document to the front or READY
position at the completion of the scan. When the DOCUMENT RETURN
feature is set to REAR, the Scanner delivers the document to the rear
Stacker at the completion of the scan.
set to FRONT, the Scanner returns the document to the front or READY
position at the completion of the scan. When the DOCUMENT RETURN
feature is set to REAR, the Scanner delivers the document to the rear
Stacker at the completion of the scan.
NOTE Some documents will always exit to the rear at the completion of
the scan regardless of the DOCUMENT RETURN setting. These
documents include:
the scan regardless of the DOCUMENT RETURN setting. These
documents include:
• Thick
documents
• Documents longer than 5 feet
(1.52 meters)
• Very wide documents that cover both document width sensors
AUTOSCAN
AUTOSCAN enabled is the default setting. Normally, the AUTOSCAN mode
is enabled. When it is enabled, the Scanner automatically begins the
scanning of a document when the document is inserted. If AUTOSCAN is
disabled, the Scanner transports the document to the starting position and
then waits for you to press the Start key before beginning the scan.
is enabled. When it is enabled, the Scanner automatically begins the
scanning of a document when the document is inserted. If AUTOSCAN is
disabled, the Scanner transports the document to the starting position and
then waits for you to press the Start key before beginning the scan.
AUTOWIDTH
AUTOWIDTH enabled is the default setting. When AUTOWIDTH is enabled,
the Scanner automatically detects the width of the document. When
AUTOWIDTH is disabled, you must enter the width of the document
manually, and very carefullly center the document when inserting it into the
Scanner.
the Scanner automatically detects the width of the document. When
AUTOWIDTH is disabled, you must enter the width of the document
manually, and very carefullly center the document when inserting it into the
Scanner.
AUTOCENTER
AUTOCENTER enabled is the default setting. When AUTOCENTER is
enabled, the Scanner automatically centers the image. When
AUTOCENTER is disabled, you must carefully center the document during
insertion into the Scanner.
enabled, the Scanner automatically centers the image. When
AUTOCENTER is disabled, you must carefully center the document during
insertion into the Scanner.