Xerox 8855 用户手册
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide
33
Making copies (continued)
Making a copy the same size as the
original document
original document
1. Set
the
Media Selection Source to Auto. The Auto indicator lamp
illuminates. This setting allows the Synergix Digital Solution to
automatically select the available media roll that best fits the image width.
automatically select the available media roll that best fits the image width.
NOTE: If the correct media size is not loaded, the next larger size will be
used.
used.
2. Select
the
Media Selection Type. The default setting is Bond.
3. Set
the
Media Selection Output Format to Synchro. This setting cuts
the media to the same length as the original document.
4. Set
Reduction/Enlargement to Preset. If the size is not already set to
100%, use the Previous and Next keys to select a reduction and press
the Enter key.
the Enter key.
5. Insert the document face down into the Scanner. If the scan does not
start automatically, press the Start key.
NOTE: To set the scan to begin automatically, refer to "Scanner Control" in
the "Main Menu" section.
the "Main Menu" section.
NOTE: If the Synergix Digital Solution must rotate the image to fit on the
selected media size, additional processing time is required. If possible, feed
the original image so that no image rotation is required. This will achieve the
fastest processing time.
selected media size, additional processing time is required. If possible, feed
the original image so that no image rotation is required. This will achieve the
fastest processing time.
For example, if an A-size copy is required on a 12-inch (30.48 cm) roll, feed
the original with the short edge first, not the long edge first. If a B-size copy is
required on a 17-inch roll, feed the document with the long edge first, not the
short edge first.
the original with the short edge first, not the long edge first. If a B-size copy is
required on a 17-inch roll, feed the document with the long edge first, not the
short edge first.
The Scanner scans the document and the Printer (if not already busy) prints
the copy immediately. If the Printer is busy when the scan is made, the copy
will be printed when the Printer becomes available.
the copy immediately. If the Printer is busy when the scan is made, the copy
will be printed when the Printer becomes available.
When the Scanner detects the trail edge of the document, the Printer
automatically cuts the media so that the copy is the same length as the
original document.
automatically cuts the media so that the copy is the same length as the
original document.