Xerox 8855 用户手册
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide
32
Making copies (continued)
Making a copy with the default settings
When the default document settings are used, the display indicates that the
roll of media that best fits the size of the original document will be
automatically selected. The reduction/ enlargement setting is 100%, so the
copy will be the same size as the original document. The copy quantity is set
to 1.
roll of media that best fits the size of the original document will be
automatically selected. The reduction/ enlargement setting is 100%, so the
copy will be the same size as the original document. The copy quantity is set
to 1.
The illustration below shows the READY screen in its default state.
NOTE: Many document settings other than the default settings are possible.
For example, the options keys on the Scanner Control Panel allow you to
control the media selection, image quality and reduction/enlargement
percentage. The Transform special features key allows you adjust the
margins around the image, specify the position of the image on the media,
and transform the image into a mirror and/or inverted image. Refer to the
applicable sections of this guide for detailed information about the many
document settings available to you.
For example, the options keys on the Scanner Control Panel allow you to
control the media selection, image quality and reduction/enlargement
percentage. The Transform special features key allows you adjust the
margins around the image, specify the position of the image on the media,
and transform the image into a mirror and/or inverted image. Refer to the
applicable sections of this guide for detailed information about the many
document settings available to you.
To make a copy using the default document settings:
1. Insert the original document face down and centered on the Document
Feed Tray of the Scanner.
NOTE: If the document is not exactly centered and the AUTOCENTER
feature is enabled, the Synergix Digital Solution will automatically correct the
problem electronically. The resulting image will still be correctly positioned on
the output media. If AUTOCENTER or AUTOWIDTH is disabled, you will
need to carefully center the document when inserting it. Refer to "Controlling
the scan" on the previous page.
feature is enabled, the Synergix Digital Solution will automatically correct the
problem electronically. The resulting image will still be correctly positioned on
the output media. If AUTOCENTER or AUTOWIDTH is disabled, you will
need to carefully center the document when inserting it. Refer to "Controlling
the scan" on the previous page.
2. Gently move the document forward until the lead edge engages the feed
rolls. The Scanner transports the document to the starting position. It
then scans the document. The resulting image is electronically sent to
the Printer and your copy is printed.
then scans the document. The resulting image is electronically sent to
the Printer and your copy is printed.
NOTE: If AUTOSCAN is disabled, you will need to press the Start key to
begin the scan. Refer to "Controlling the scan" on the previous page.
begin the scan. Refer to "Controlling the scan" on the previous page.
3. When the document is returned to the READY position, do one of the
following:
• Pull the document to remove it. Lift the Thick Document Lever to
• Pull the document to remove it. Lift the Thick Document Lever to
remove fragile or thick documents.
• Press
the
Start key on the Scanner Control Panel to scan the
document again.
NOTE: If DOCUMENT RETURN is set to REAR, the document is delivered
to the rear Stacker. Some documents exit to the rear Stacker regardless of
the DOCUMENT RETURN setting. Refer to "Controlling the scan" on the
previous page.
to the rear Stacker. Some documents exit to the rear Stacker regardless of
the DOCUMENT RETURN setting. Refer to "Controlling the scan" on the
previous page.
READY TO COPY
INSERT DOCUMENT
INSERT DOCUMENT
100.0
AUTO
1