Xerox 8855 用户手册
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide
35
Making copies (continued)
Scanning when using a Folder
When using a Folder, the document must be inserted in the Scanner with the
title block positioned as shown in Table 3 on the next page in order to have
the title block visible after the copy is folded. To ensure that the correct size
fold is obtained, use the paper roll width indicated in the Recommended
Printer Media Roll Width column.
title block positioned as shown in Table 3 on the next page in order to have
the title block visible after the copy is folded. To ensure that the correct size
fold is obtained, use the paper roll width indicated in the Recommended
Printer Media Roll Width column.
Documents larger than 80 inches (2.1M) can only be partially folded.
When using the Reduction/Enlargement feature and a Folder, you must
orient and insert the document title block in the same orientation as the
resulting enlargement or reduction copy size. In addition, the recommended
media should be used.
orient and insert the document title block in the same orientation as the
resulting enlargement or reduction copy size. In addition, the recommended
media should be used.
For example: the job requires that an A (A4) document be enlarged to a C
(A2) document. To have the title block be visible after folding, the A (A4)
document must be inserted as if it were a C (A2) document. Refer to Table 3
on the next page.
(A2) document. To have the title block be visible after folding, the A (A4)
document must be inserted as if it were a C (A2) document. Refer to Table 3
on the next page.
To ensure that the copy is folded correctly, and will not jam in the Folder, it is
recommended that you only select standard reductions and enlargements
(e.g., A to C, A to E, B to D, A4 to A2, A4 to A0, A3 to A1, etc.). These
selections are identified in Table 3 by the document icon. Those areas that
are blank are not recommended because the title block may not be visible
after the folding is complete. You may want to refer to "Custom R/E Presets"
in the "Main Menu" section, and set up the Reduction/Enlargement default to
show the standard reduction and enlargement shown in Table 3. Set the
reduction /enlargement to display A to C (A4 to A2) above the keys.
recommended that you only select standard reductions and enlargements
(e.g., A to C, A to E, B to D, A4 to A2, A4 to A0, A3 to A1, etc.). These
selections are identified in Table 3 by the document icon. Those areas that
are blank are not recommended because the title block may not be visible
after the folding is complete. You may want to refer to "Custom R/E Presets"
in the "Main Menu" section, and set up the Reduction/Enlargement default to
show the standard reduction and enlargement shown in Table 3. Set the
reduction /enlargement to display A to C (A4 to A2) above the keys.
For additional folding information, refer to the Folder Operator Manual.