Xerox 8855 用户手册
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide
34
Making copies (continued)
Fitting the image to a fixed copy size
The Synergix Digital Solution can automatically fit the scanned image onto a
predefined size of media.
predefined size of media.
1. Set
the
Media Selection Source to Auto. The Auto indicator lamp
illuminates. This setting allows the Synergix Digital Solution to
automatically select the available media roll that best fits the image width.
automatically select the available media roll that best fits the image width.
2. Select
the
Media Selection Type of media. The default setting is Bond.
3. Set
the
Media Selection Output Format to Preset and select the
desired page size. This setting cuts the media to a previously defined
length that the operator chooses.
length that the operator chooses.
4. Press
the
Previous or Next key until the desired output size is
highlighted.
5. Press
the
Enter key to confirm your choice.
6. Set
the
Reduction/Enlargement to Auto.
7. Insert the document face down into the Scanner. If the scan does not
start automatically, press the Start key.
NOTE: To set the scan to begin automatically, refer to "Scanner Control" in
the "Main Menu" section.
the "Main Menu" section.
The Scanner scans the document, and the Printer (if not already busy)
prints the copy immediately. If the Printer is busy when the scan is made,
the copy will be printed when the Printer becomes available.
prints the copy immediately. If the Printer is busy when the scan is made,
the copy will be printed when the Printer becomes available.
PRESET OUTPUT FORMAT
SELECT
8.5 X 11 ANSI A