Wegener Communications DVR395 用户手册

  

Page 

23 

 

Page 23 of 30 

DVR395/DVR396-002 

This section provides procedures for initial setup of the unit. 

The OSD information is contained in the video output from the receiver.  It is turned on by 
pressing either the <SELECT> or <ENTER> push-button on the front panel. The display is 
removed by selecting Exit from the Main Menu. When a menu is first shown, the cursor is 
always placed on its first action field (or action with edit field, which ever is first).  

The OSD provides the following information and actions: 

 

1.  Carrier Status. 

 

2.  Signal Strength Monitoring. 

 

3.  Selecting the Perm Settings 

 

4.  Selecting the Serial Port device. 

 

5.  Software Version. 

All menus are white text with a solid blue background with highlight as blue text on white 
background.  There are four field types: Action, Action w/ Edit, Edit, Edit w/ Choices.  The 
cursor can be moved only to these fields. The function of the <SELECT> and <ENTER> push-
button for each field type is described below. 

Action Field 

Moves cursor to next action field 
(or action w/ edit field, which 
ever is next). Wraps at end. 

Takes action on the current field. 

Action w/ Edit Field 

Same as for action field. 

Moves cursor to corresponding 
edit field. 

Edit Field 

If cursor is not on last digit within 
edit field, moves cursor to next 
digit. Else, moves to next action 
field (or action w/ edit field, 
which ever is next) 

Increments current digit within 
edit field. Wraps back to 
beginning at 9. 

Edit Field w/ Choices  Moves cursor to next action field 

(or action w/ edit field, which 
ever is next). 

Scrolls through list of choices. 
Wraps back to beginning on last.