Wegener Communications DVR395 用户手册
Page
25
Page 25 of 30
DVR395/DVR396-002
For Carrier Status:
•
From the Main Menu, select “Carrier Status.”
•
Press <ENTER> to display the “Carrier Status”
screen.
screen.
•
This is a read-only screen.
•
Press <ENTER> to Return to the Main Menu.
For Signal Strength:
•
From the Main Menu, select “Signal Strength”
and Press <ENTER> to display this screen
and Press <ENTER> to display this screen
•
Displays signal level. The upper bar is the signal
strength. The lower bar gives a higher resolution
of and deviation from the selected value.
strength. The lower bar gives a higher resolution
of and deviation from the selected value.
•
To use the lower bar, select “Calibrate” and Press
<ENTER>.
<ENTER>.
•
To exit this screen, select “Return To Main
Menu” and press <ENTER>.
Menu” and press <ENTER>.
For Serial Port Select:
•
From the Main Menu, select “Serial Port Select”
and Press <ENTER> .
and Press <ENTER> .
•
Use <ENTER> to scroll the possible devices.
•
When the desired device is displayed, press
<SELECT> to highlight “Activate Selection.”
<SELECT> to highlight “Activate Selection.”
•
Press <ENTER> to save the change and exit this
menu.
menu.
•
To exit without saving the changes, select “Return To Main Menu” and Press <ENTER>.
CARRIER STATUS
Acquisition Mode:
INSTALL
Carrier (MHz):
12000.00
Data Rate (Mbps):
5.000
FEC Rate:
1/2
Tag Site:
0
MP56 Mode:
0
AVG. Eb/No (dB):
8.0 dB
Current Eb/No dB:
8.5 dB
Return To Main Menu
SIGNAL STRENGTH
l l l l l l l l l l l l l l l l l
l ^ l
Calibrate
Return To Main Menu
SERIAL PORT SELECT
Device: Printer
Activate Selection
Return To Main Menu