Raritan Computer 255-30-6000-00 用户手册
Failsafe Upgrade Feature
162
User Stations
The failsafe capability is a standard feature of P2‐EUST and P2‐EUST/C.
P2‐UST with firmware version earlier than 1F9 does not have this feature.
For an older P2‐UST, you can upgrade its firmware to get the failsafe
feature.
P2‐UST with firmware version earlier than 1F9 does not have this feature.
For an older P2‐UST, you can upgrade its firmware to get the failsafe
feature.
¾
To update user stations for Failsafe Upgrade feature
(P2-UST Only)
The procedures are the same as those outlined in General Update
Procedure (on page 153). Note that the filename for upgrading the
P2‐UST user station for failsafe capability is “V5_1F9.hex” or later.
Procedure (on page 153). Note that the filename for upgrading the
P2‐UST user station for failsafe capability is “V5_1F9.hex” or later.
¾
To verify the firmware version
At the upgraded user station:
1. Activate the Paragon OSUI by pressing the hot key (default: Scroll
Lock) twice quickly.
2. Press F8 to display the user stationʹs version information.
¾
To recover user stations after upgrade failure
As long as your user station has the failsafe capability, you can restore its
function whenever the upgrade failure occurs.
function whenever the upgrade failure occurs.
1. Power cycle the user station.
2. Repeat the same upgrade process until the upgrade is finished
successfully.