TP-LINK TD-W8960N Benutzerhandbuch
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
28
Figure 4-19
4.4.2.3 ATM-EoA-Bridging
If you want to adopt the Bridge service and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select EoA option for DSL Link Type (see
2. Click
the
Add button on the screen Figure 4-7. Select WAN Service Interface over ATM PVC
3. Select Bridging option for the WAN service type on the screen (as shown Figure 4-9), and
click Next button to continue.
4. On the screen (as shown Figure 4-13) you will see the detailed settings you’ve made. Please
click the Apply/Save button to save these settings.
4.4.2.4 ATM-PPPoA
If your ISP provides a PPPoA connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select PPPoA option for DSL Link Type (see
2. Click
the
Add button on the screen Figure 4-7 and the next configuration is similar to PPPoE,
). The difference is that you don’t need to set the
PPPoE Service Name and Bridge PPPoE Frames Between WAN and Local Ports
on the
4.4.2.5 ATM-IPoA
If your ISP provides an IPoA connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface.
below to add a WAN service over a selected ATM interface.
1. Add a new ATM interface and select IPoA option for DSL Link Type (see
2. Click
the
Add button on the screen Figure 4-7 and the next configuration is similar to IPoE
). The difference is that you have to manually set the
Static IP Address on the screen of Figure 4-15, and the Static IP Address for DNS Server on
the screen of Figure 4-18.
the screen of Figure 4-18.