Moxa Technologies EDS-405A User Manual
EDS-408A/405A Series User’s Manual
Featured Functions
3-47
Mail Server IP/Name
Setting
Description
Factory Default
IP address
The IP Address of your email server.
None
Account Name
Setting
Description
Factory Default
Max. 45 Charters
Your email account.
None
Password Setting
Setting
Description
Factory Default
Disable/Enable to
change Password
change Password
To reset the Password from the Web
Browser interface, click the Change
password check-box, type the Old
Password, type the New Password, retype
the New password, and then click Activate.
The password can be a maximum of 45
characters.
Browser interface, click the Change
password check-box, type the Old
Password, type the New Password, retype
the New password, and then click Activate.
The password can be a maximum of 45
characters.
Disable
Old Password
Type the current password when changing
the password
the password
None
New Password
Type new password when enabled to
change password. The password can be a
maximum of 45 characters.
change password. The password can be a
maximum of 45 characters.
None
Retype Password
If you type a new password in the
Password field, you will be required to
retype the password in the Retype new
password field before updating the new
password.
Password field, you will be required to
retype the password in the Retype new
password field before updating the new
password.
None
Email Address
Setting
Description
Factory Default
Max. 30
Characters
Characters
You can set up to 4 email addresses to
receive warning emails from the EDS.
receive warning emails from the EDS.
None
Send Test Email
After finishing with the email settings, you should first press the Activate button to activate those
settings, and then press the Send Test Email button to verify that the settings are correct.
settings, and then press the Send Test Email button to verify that the settings are correct.
NOTE
Auto warning e-mail messages will be sent through an authentication protected SMTP server that
supports the CRAM-MD5, LOGIN, and PAIN methods of SASL (Simple Authentication and
Security Layer) authentication mechanism.
We strongly recommend not entering your Account Name and Account Password if auto warning
e-mail messages can be delivered without authentication mechanism.
supports the CRAM-MD5, LOGIN, and PAIN methods of SASL (Simple Authentication and
Security Layer) authentication mechanism.
We strongly recommend not entering your Account Name and Account Password if auto warning
e-mail messages can be delivered without authentication mechanism.
Configuring Relay Warning
The Auto Relay Warning function uses relay output to alert the user when certain user-configured
events take place. There are two basic steps required to set up the Relay Warning function:
events take place. There are two basic steps required to set up the Relay Warning function:
1. Configuring Relay Event Types
Select the desired Event types from the Console or Web Browser Event type page (a
description of each event type is given later in the Relay Warning Events setting subsection).
description of each event type is given later in the Relay Warning Events setting subsection).