Whirlpool WGD7300X User Manual

Select the correct cycle and dryness level or temperature for 

 

your load. If an Automatic Cycle is running, the display shows 

 

the estimated cycle time when your dryer is automatically 

 

sensing the dryness level of your load. If a Manual Cycle is 
running, the display shows the exact number of minutes 
remaining in the cycle.
Cool Down tumbles the load without heat during the last few 
minutes of all cycles. Cool Down makes the loads easier to handle 
and reduces wrinkling. The length of the Cool Down depends on 
the load size and dryness level.

■

Follow care label directions when they are available.

■

If desired, add a fabric softener sheet. Follow package 
instructions.

■

To reduce wrinkling, remove the load from the dryer as soon 
as tumbling stops. This is especially important for permanent 
press, knits, and synthetic fabrics.

■

Avoid drying heavy work clothes together with lighter fabrics. 
This could cause overdrying of lighter fabrics and lead to 
increased shrinkage or wrinkling.

■

Dry most loads using the preset cycle settings.

■

Refer to the Automatic or Manual Cycle Settings chart (in the 
“Cycles” section) for a guide to drying various loads. 

■

Drying temperature and dryness level are preset when 

 

you choose an Automatic Cycle. You can select a 

 

different dryness level, depending on your load, by 
pressing Dryness Level and choosing More, Normal, 

 

Less, or Damp. 

NOTE: Time adjust and changing Temperature setting is 
not available with Automatic Cycles. You cannot use the 
Time Adjust and you cannot choose a Temperature with 
the Automatic Cycles.

■

If you wish to adjust the cycle length of a Manual Cycle, 
press the Time Adjust up or down arrows. Adjust the 
temperature of a Manual Cycle by pressing Temp until the 
desired temperature is selected.

NOTE: You cannot choose a dryness level with Manual 
Cycles. Changing the Dryness Level setting is not 
available with Manual Cycles.

Select the drying cycle that matches the type of load you 

 

are drying. See the Automatic, Steam, or Manual Cycle 

 

Settings Charts.

Automatic Cycles allow you to match the cycle to the load you are 
drying. See the following Automatic Preset Cycle Settings chart. 
Each cycle dries certain fabrics at the recommended temperature. 
A sensor detects the moisture in the load and automatically 
adjusts the drying time for optimal drying. 
NOTE: Not all cycles are available on all models.

 

 

Heavyweight mixed loads, cottons, 
and jeans

High

 

Blankets and comforters

Medium

 

Sturdy fabrics such as corduroys 

 

and work clothes

Medium

 

Designed for average size loads of 
medium weight items

Medium

 

 

No-iron fabrics, such as sports shirts, 
casual business clothes, permanent 
press, and synthetics

Low

 

 

Towels

High

 

Lingerie, blouses, or washable 

 

knit fabrics

Extra-Low