Whirlpool WGD7300X User Manual

Page of 32
8
Additional Features
Automatic Cycle Modifiers
Use the Dryness Modifier to select dryness levels for the 
Automatic Cycles. Press DRYNESS LEVEL until the desired 
Dryness Level setting illuminates.
Depending on your load, you may select different drying levels. 
Press the DRYNESS LEVEL button and select either, More, 
Normal (Default), Less or damp. Once the dryness level has been 
achieved, dryer will automatically shut off.  
NOTE: Once dryness level has been set, it cannot be changed 
without stopping cycle and cannot be used on Manual cycles. 
Timed Cycle Modifiers
Use the Temperature Modifier to select temperatures for 
 
the Timed Cycles. Press TEMP until the desired temperature 
setting illuminates. 
NOTE: Temperature modifiers cannot be used with the Auto 
 
Dry Cycles.
Air Only
Use the Air Only Modifier for items that require drying without heat 
such as rubber, plastic and heat-sensitive fabrics. This table 
shows examples of items that can be dried using Air Only.
Type of Load
Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys
20 - 30
Plastic - Shower curtains, tablecloths
20 - 30
Rubber-backed rugs
40 - 50
Olefin, polypropylene, sheer nylon
10 - 20
*Reset cycle to complete drying, if needed.
When using Air Only:
Check that coverings are securely stitched.
Shake and fluff pillows by hand periodically during the cycle.
Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Only is not available with Automatic Cycles.
Drum Light Option
On some models, select Drum Light to turn on the light inside 
 
the dryer drum. During a cycle, if Drum Light is selected, the 
 
drum light turns on and will remain on until DRUM LIGHT is 
pressed again, the door is opened and closed, or will turn off 
 
after 5 minutes.
When the dryer is not running, the drum light will turn on when 
DRUM LIGHT is pressed or the dryer door is opened, and it will 
remain on until the dryer door has been open for 5 minutes, the 
dryer door is closed or DRUM LIGHT is pressed again. 
Press DRUM LIGHT at any time to turn the drum light ON or OFF.
WRINKLE SHIELD™ Setting Option
The WRINKLE SHIELD™ setting helps keep wrinkles from forming 
when you cannot unload the dryer promptly at the end of a cycle. 
During this option, the dryer stops tumbling and then tumbles 
again for a brief period.
Press the WRINKLE SHIELD™ setting to get up to 
120 minutes of heat-free, periodic tumbling at the end 
 
of a cycle.
Stop the WRINKLE SHIELD™ setting at any time by pressing 
WRINKLE SHIELD™ setting or opening the dryer door.
For the Perm Press/Casual Cycle, the WRINKLE SHIELD™ 
setting is preset to ON. The other Automatic Cycles will retain 
the WRINKLE SHIELD™ setting. For example, if you select the 
WRINKLE SHIELD™ setting in the Normal cycle, the 
WRINKLE SHIELD™ setting will be on the next time you 
select the Normal cycle.
NOTE: If you do not select the WRINKLE SHIELD™ setting, the 
dryer stops after cool down.
Damp Dry Signal Option
Select the Damp Dry Signal to alert you that your clothes are 
approximately 80% dry. This is useful when you want to remove 
lightweight items in a mixed load to avoid overdrying or remove 
partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in 
 
a mixed load. When the signal goes off, open the door to stop 
 
the dryer, rearrange the load inside the dryer, close the door and 
restart the dryer to finish the drying cycle. Rearranging the load 
will aid in the drying process.
NOTE: The Damp Dry Signal is available only with the 
Automatic Cycles.
Cycle Signal Option
The Cycle Signal produces an audible sound when the drying 
cycle is finished. Promptly removing clothes at the end of the 
cycle reduces wrinkling.
Press CYCLE SIGNAL until the desired volume (Loud, Soft, or Off) 
is selected.
NOTE: When the WRINKLE SHIELD™ setting is selected and the 
Cycle Signal is on, a tone sounds every 5 minutes until the clothes 
are removed, or the WRINKLE SHIELD™ setting ends.
Status Lights
Follow the progress of your dryer with the drying Status indicator 
lights.
Sensing
The beginning of a cycle and turns off 5 minutes into 
 
the cycle.
Eco Monitor
The Eco Monitor shows your estimated energy usage compared 
to the other cycles and options.