Whirlpool WGD7300X User Manual

WARNING

■

To contact a qualified electrical installer.

■

To be sure that the electrical connection is adequate and 

 

in conformance with the Canadian Electrical Code, C22.1-latest 
edition and all local codes. A copy of the above codes standard 
may be obtained from: Canadian Standards Association, 178 
Rexdale Blvd., Toronto, ON M9W 1R3 CANADA.

■

To supply the required 4 wire, single phase, 120/240 volt, 

 

60 Hz., AC only electrical supply on a separate 30-amp 

 

circuit, fused on both sides of the line. A time-delay fuse 

 

or circuit breaker is recommended. Connect to an individual 
branch circuit.

■

This dryer is equipped with a CSA International Certified 

 

Power Cord intended to be plugged into a standard 14-30R

 

wall receptacle. The cord is 5 ft. (1.52 m) in length. Be sure wall 
receptacle is within reach of dryer’s final location.

If using a replacement power supply cord, it is recommended that 
you use Power Supply Cord Replacement Part Number 9831317. 

For further information, please reference the service numbers 
located in the “Assistance or Service” section.

■  

For a grounded, cord-connected dryer: 

This dryer must be grounded. In the event of malfunction or 
breakdown, grounding will reduce the risk of electric shock 
by providing a path of least resistance for electric current. 
This dryer is equipped with a cord having an 
equipment-grounding conductor and a grounding plug. The 
plug must be plugged into an appropriate outlet that is 
properly installed and grounded in accordance with all local 
codes and ordinances.

WARNING: 

Improper connection of the 

equipment-grounding conductor can result in a risk of 
electric shock. Check with a qualified electrician or service 
representative or personnel if you are in doubt as to 
whether the dryer is properly grounded. Do not modify the 
plug provided with the dryer: if it will not fit the outlet, have 
a proper outlet installed by a qualified electrician.