Whirlpool WGD7300X User Manual

6. Hang door by placing screw heads into top slotted holes 

 

of hinges and slide door down. Align bottom screw holes 

 

in hinge and door. Install two bottom screws. Tighten 

 

all hinge screws.

7. Close door to engage door strike.

■

 

There may be 2 household fuses or circuit breakers for the dryer. 
Check that both fuses are intact and tight, or that both circuit 
breakers have not tripped. Replace the fuse or reset the circuit 
breaker. If the problem continues, call an electrician.

■

Is the correct power supply available? 

 

Electric dryers require 240-volt power supply. Check with 

 

a qualified electrician.

■

Was a regular fuse used? 

 

Use a time-delay fuse.

■

 

The drum may be turning, but you may not have heat. Electric 
dryers use 2 household fuses or circuit breakers. Replace 

 

the fuse or reset the circuit breaker. If the problem continues, 

 

call an electrician.

■

 

Was the drying cycle interrupted by a power failure?

 

Press and hold START/PAUSE to restart the dryer.

 

Check to see if a household fuse has blown or circuit breaker 
has tripped. Electric dryers use two household fuses 

 

or breakers. Replace the fuse or reset the circuit breaker. 

Confirm the power cord is properly installed.

Select a Timed Dry heated cycle, and restart the dryer.

If the message persists, consult a qualified electrician.

■

 

Call for service.

■

 

 

Call for service.