Janitza Prodata 2 5224001 Data Sheet

42

The device underwent various safety checks before 
delivery and is marked with a seal. If a device is open, 
then the safety checks must be repeated. Warranty 
claims will only be accepted if the device is unopened.

Repair work can be carried out by the manufacturer only.

The front film can be cleaned with a soft cloth and 
standard household cleaning agent. Do not use acids 
and products containing acid for cleaning.

The ProData 2 can be reused or recycled as electronic 
scrap in accordance with the legal provisions. 
The permanently installed lithium battery must be 
disposed of separately.

Should questions arise, which are not described in this 
manual, please contact the manufacturer directly.

We will need the following information from you 
to answer any questions:

- Device name (see rating plate),
- Serial number (see rating plate),
- Software release,
- Supply voltage,
- Precise description of the error.

The devices are calibrated by the manufacturer at 
the factory - it is not necessary to recalibrate the device 
providing that the environmental conditions are complied 
with.

We recommend having a re-calibration carried out 
by the manufacturer or an accredited laboratory 
approximately every 5 years.