Wegener Communications IPUMP 562 User Manual

 www.wegener.com

800092-01 Rev. A

 13

This chapter provides information and procedures for powering up, operating the unit, 
upgrading software and tracking alarm conditions. Information on four-port RF option and 
Universal LNB Power is also presented.

The IRD can be controlled via 

 network, front-panel using push-buttons and OSD 

(On-Screen Display) or LCD menus or the diagterm terminal using commands. The 

 

is generally the primary method of controlling an IR. See the 

 Manual for a complete 

explanation.

The 

 is set up at the factory. However, you can customize the settings to fit your 

system using the front-panel push-buttons and LCD screens or OSD menus. You may also 
view those settings and various status information using the front-panel LCD, LED or OSD 
screens.

Normally, the LCD on the front-panel displays Unit label and currently tuned channel 
parameters for information. Pressing 

 on the front-panel activates the LCD backlight. 

When the OSD menu is active, the LCD on the front-panel displays the OSD item currently 
selected. When certain status conditions, such as loss of signal occur, the LCD 
automatically gets activated with illuminated backlight and displays relevant information on 
the condition. 

The On-Screen Display (OSD) menus are used to configure settings or monitor the status of 
the IRD. The OSD information displays white text on blue background overlying 80% of the 
video output viewed on a monitor connected to any of the video ports. The OSD screens are 
activated (displayed on video monitor) and the menus can be navigated using the push-
buttons on the front-panel. On menus, a selected item is displayed with black text on white 
background. Following example represents one of the OSD menus available on 

.

iPump 562

Digital Media Server