Wegener Communications IPUMP 562 User Manual

14 

 800092-01 Rev. A 

www.wegener.com

Use the arrow buttons and 

 on the front panel to navigate and edit the fields on LCD 

and OSD menus. Any of the push buttons activate OSD and LCD. The arrow buttons are 
used to navigate through menus and to either change or display items to set desired options 
for the IRD. The 

 button is generally used to select menu items on LCD and OSD 

menus. Selectable fields allow you to change the whole parameter from pre-determined 
options. Editable fields allow you to change each digit of the parameter. Once a field is 
updated, you must select Activate and Exit on the submenu and then press 

 to update 

the value of the field. Before pressing 

, you may go back to any field and correct it prior 

to acceptance. The left arrow button usually steps back a menu. 

Upon power up, the IRD initializes all system components and supplies an operational 
status. A steady Green LED indicates that it is locked on a carrier and is capable of 
producing output (Audio/Video/Data).

In case of problems, the LED flashes Red for alarm conditions or Amber for warning 
conditions. In general, alarms indicate that the unit cannot produce output, while Warnings 

selects submenu or 
drop-down list

goes to editable field

accepts changes

no action

no action

moves cursor to right

exits OSD

goes to previous menu 
level

moves cursor to left or 
abandon changes

goes to next or 
previous menu item

goes to next or previous 
menu item

increases value of selected 
item

goes to next or 
previous menu item

goes to next or previous 
menu item

decreases value of selected 
item