Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド
FS700TS Smart Switch Software Administration Manual
3-14
Managing System Settings
v1.0, September 2007
–
Copper Ports – The copper port is used as the stacking port.
2. Select the Master Election mode.
3. If you selected Force Master, select either 1 or 2 from the stack ID list.
4. Select the type of Stacking Ports After Reset.
5. Click APPLY to update the device.
6. Reset the device for the new settings to take effect. See
for detailed instructions on
resetting the device.
Advanced
The Stacking Advanced menu contains the following options:
•
•
Stack Configuration
To configure advanced stacking:
1. Click System > Stacking > Advanced > Stack Configuration. The Advanced Stack
Configuration screen displays:
The Advanced Stack Configuration screen contains the following fields:
•
Master Election – Select the mode by which the Stacking Master is elected. When the
stack is powered up and completes the boot-up process, the Master unit is elected within
0.5 seconds. Master election may be based on Master preemptive mode, Master push
button, or MAC address. The possible field values are:
stack is powered up and completes the boot-up process, the Master unit is elected within
0.5 seconds. Master election may be based on Master preemptive mode, Master push
button, or MAC address. The possible field values are:
–
Automatically – The Stacking Master is selected automatically by software.
Figure 3-7