Honeywell MRP-2001E Benutzerhandbuch

Programming

68

MRP-2001 & MRP-2001E   PN 53040:A  4/16/2007

Pressing 2 while viewing the Select Banner Screen will display the following screen:

This screen allows the programmer to enter a custom banner.  A flashing cursor will appear in 
the bottom left corner of the display.  A maximum of 20 characters (including spaces) can be 
entered into the screen.  After entering up to 20 characters in the screen, press Enter to store the 
entry.  To quickly clear the current banner, press the CLR key.

To enter alphanumeric characters from the keypad, repeatedly press the appropriate key until 
the desired character is displayed in the first position.  For example, to enter the letter B, press 
the 2 (ABC) key three times to toggle through the characters 1, A and B.  Press the right arrow 
key to move the cursor one position to the right and repeat the process to enter the next 
character.  To enter a space, press the * (QZ) key four times to place a blank in the desired 
position.  When all characters have been entered, press the Enter key to store the information.  
The display will return to the Select Banner Screen.

The control panel time and date can be changed by pressing 1 while viewing the System Setup 
Screen #2.  The following screen will be displayed:

  USER BANNER-LINE 1

  PRESS ENTER IF OK

   SYSTEM SETUP
1=TIME-DATE
2=TROUBLE REMIND
3=CHARGR DISABLE

System Setup Screen #2

   TIME AND DATE
1=TIME          10:00A
2=DATE        04072006
3=CLOCK FORMAT    12HR

   TIME AND DATE
1=DAYLIGHT SAVINGS