Magnetek TM7310rev01 Benutzerhandbuch

 

NOTE:  The only parameter that should ever need to be adjusted is INPUT L-L VOLTS.  Other 
parameters are for Magnetek Engineering use only. 
 

Proportional gain for out-of-
phase current regulator 

N N 

Integral gain for out-of-
phase current regulator 

N N 

Proportional gain for in-
phase current regulator 

N N 

Integral gain for in-phase 
current regulator 

N N 

Proportional gain for bus 
voltage regulator 

N N 

Integral gain for bus voltage 
regulator 

N N 

(Input Line to Line Voltage - 
Input Voltage) 
This parameter sets the 
input voltage or AC line 
input voltage to the drive.   

N Y 

(DC bus voltage reference)  
Adjusts the DC bus voltage 
boost above the peak of 
line voltage.  

N N 

(Software Bus Overvoltage 
Level) DC bus software 
Overvoltage trip point.   

N N 

(Bus Voltage Reference 
Source)  Selects the bus 
voltage boost reference. 
•  Track Line V uses the 

actual line voltage for the 
bus reference.  
Recommended for 
systems with a stiff line. 

•  Trk Vin Param uses 

INPUT L-L VOLTS (A5) 
for the bus reference.  
Recommended to 
systems with a soft line. 

N N 

(Phase Locked Loop Filter 
Frequency) Utility line 
Phase Locked Loop filter 
corner Frequency 

N N 

(Line Side PWM 
Frequency) Converter 
PWM Freq 

N N 

46