Zebra Technologies 2237A10L010 Benutzerhandbuch
147
Troubleshooting
LCD Error Messages
9/6/07
Xi
IIIPlus/R110Xi/R170Xi User Guide
13383L-004 Rev. A
LCD Error Messages
for LCD errors, the possible
causes, and the recommended solutions.
Table 12 • LCD Error Messages
LCD Display/
Printer Condition
Printer Condition
Possible Cause
Recommended Solution
The printer stops; the
RIBBON light is on; the
ERROR light flashes.
RIBBON light is on; the
ERROR light flashes.
In thermal transfer mode, ribbon is
not loaded or incorrectly loaded.
not loaded or incorrectly loaded.
Load ribbon correctly.
In thermal transfer mode, the
ribbon sensor is not detecting
ribbon that is loaded incorrectly.
ribbon sensor is not detecting
ribbon that is loaded incorrectly.
1.
Load ribbon correctly.
2.
Calibrate the sensors. See
.
In thermal transfer mode, media is
blocking the ribbon sensor.
blocking the ribbon sensor.
1.
Load media correctly.
2.
Calibrate the sensors. See
.
In thermal transfer mode, the
printer did not detect the ribbon
even though it is loaded correctly.
printer did not detect the ribbon
even though it is loaded correctly.
1.
Print a sensor profile. See
. The
ribbon out threshold (marked by
the word
the word
RIBBON
) is likely too
high, above the black area that
indicates where the ribbon is
detected.
indicates where the ribbon is
detected.
2.
Calibrate the sensors or load
printer defaults. See
printer defaults. See
or
If you are using direct thermal
media, the printer is waiting for
ribbon to be loaded because it is
incorrectly set for thermal transfer
mode.
media, the printer is waiting for
ribbon to be loaded because it is
incorrectly set for thermal transfer
mode.
Set the printer for Direct Thermal
mode. See
mode. See
.
ERROR CONDITION
RIBBON OUT