Siemens D410 Benutzerhandbuch
Maintenance and service
5.1 Replacing modules
D410
122
Commissioning Manual, 08/2008 Edition
Note
DO NOT delete the module in Slot 2 when replacing it!
DO NOT delete the module in Slot 2 when replacing it!
Figure 5-1
HW Config module replacement
3. "Drag-and-drop" the new module to the upper field of the card rack and confirm the dialog
shown with "Yes".
The module is replaced.
The module is replaced.
4. Save and compile the hardware configuration in order to activate the changes.
5. Close HW Config.
5. Close HW Config.
The configuration data for your SIMOTION device is immediately activated in the
SIMOTION SCOUT project and the entire project saved. This includes activation of all
changes made to the project, for example, to the axis configuration.
6. Select "SINAMICS Integrated" in the Project Navigator.
7. Open the context menu and click "Target device > Device version". A window opens in
7. Open the context menu and click "Target device > Device version". A window opens in
which you can change the appropriate version.
8. Select the version of the replaced D410.