Siemens D410 Benutzerhandbuch

 

Commissioning (software) 

 

4.6 Using drive-related I/Os by SIMOTION 

D410 
Commissioning Manual, 08/2008 Edition 

95

 

Interconnecting the message frame for TM31 

The next section describes how you can transfer signals from TM31 to SIMOTION 

(PROFIBUS send direction). 

 

 

Note 
To perform interconnections in online mode, you must: 
• 

Prior to the interconnection, download the message frame configuration into the target 

device. Function: Download the CPU / drive device to the target unit. 

• 

After the interconnection, download the settings from the target device into the 

programming device / PC. Function: Download the CPU / drive unit to the programming 

device. 

 

 
1.  Double-click the "PROFIBUS" entry in the "Communication" dialog of the TM31 you 

created. The corresponding dialog box opens. 

2.  Click "Binector/connector converter" in the "PROFIBUS send direction" tab. The 

"Binector/connector converter" tab opens 

3.  Select the source for status word 1 by clicking the "Source status word 1" field and then 

select the corresponding PSD, in this example, TM31 -> p2051. . . Select PSD1. 

 

Figure 4-24  Selecting the PSD 

4.  Click the button leading the "Source status word 1" field. The PSD bits are now displayed. 
5.  Click in a field and select the default signal, for example, bit 0. 

This bit can be used, for example, to transmit the status at digital input DI 0 to 

SIMOTION.