Summit HL-630 OPC Benutzerhandbuch
23
Minolta PageWorks 1400
Minolta Toner cartridge Part #9J04203
Minolta Drum Cartridge Part # M4519401
OEM Stated Yield Toner: 2,000
OEM Stated Yield OPC: 20,000
Toner Cartridge: These toner cartridges have a chip
that must be replaced each cycle. The chip is located
on the bottom left side of the cartridge. There are
different chips used for different areas around the
world. Make sure you have the correct chip for your
region.
that must be replaced each cycle. The chip is located
on the bottom left side of the cartridge. There are
different chips used for different areas around the
world. Make sure you have the correct chip for your
region.
Minolta Color PageWorks
Minolta Part # 1710437-001 (Black), 1710437-004
(Cyan), 1710437-003 (Magenta), 1710437-002
(Yellow)
**Old Minolta Part Numbers 0940-501/701/401/601
Discontinued**
OEM Stated Yield: 20,000 (Minolta and
Lexmark)
Lexmark Optra SC 1275 Toner
Lexmark Part # 1361751 (Black), 1361752 (Cyan),
1361753 (Magenta), 1361754 (Yellow)
The Minolta Color PageWorks Toner cartridges all
have a glass fuse located under the two metal
contacts on the bottom of the cartridge. The
replacement fuse is a fast acting, 5 x 20mm, 250V,
80mA, glass type. These fuses should be replaced
every cycle. The Minolta and Lexmark cartridges are
NOT interchangeable. The small fins on the bottom
of each are in different locations. These fins will
block the installation of the wrong cartridge into the
machine. The same fuses are used for both cartridge
types.
have a glass fuse located under the two metal
contacts on the bottom of the cartridge. The
replacement fuse is a fast acting, 5 x 20mm, 250V,
80mA, glass type. These fuses should be replaced
every cycle. The Minolta and Lexmark cartridges are
NOT interchangeable. The small fins on the bottom
of each are in different locations. These fins will
block the installation of the wrong cartridge into the
machine. The same fuses are used for both cartridge
types.
Mita LDC-650
Mita Cartridge Part # 63582010, Pitney Bowes
Part # 9640
OEM Stated Yield: 10,000
On the gear side of the cartridge there is a large
white gear with a floating tab mechanism that has
two notches in it. For the machine to accept the
cartridge as new, the tab must be set so that the
outermost notch is engaged. Be careful to reset this
tab after testing, as it will automatically move to the
inner notch every time the cartridge is installed. If
the tab is left in this position, the machine will show
change cartridge when the cartridge is installed.
white gear with a floating tab mechanism that has
two notches in it. For the machine to accept the
cartridge as new, the tab must be set so that the
outermost notch is engaged. Be careful to reset this
tab after testing, as it will automatically move to the
inner notch every time the cartridge is installed. If
the tab is left in this position, the machine will show
change cartridge when the cartridge is installed.
NEC LC-800 OPC
NEC OPC Cartridge Part # 20-020
OEM Stated Yield: 7,000
With the power on, open the cover.
Press and hold the PC RESET button down. While
continuing to press the button, insert the OPC
cartridge. Release the button and close the door.
Press the ONLINE button. The counter is reset
Press and hold the PC RESET button down. While
continuing to press the button, insert the OPC
cartridge. Release the button and close the door.
Press the ONLINE button. The counter is reset
OKIDATA DRUM
CARTRIDGES
Okidata over the years has released a lot of
printers/fax machines all with different engines.
Unfortunately almost all of them require a different
reset procedure. In fact even some of the machines
that use the same engine have different reset
procedures! The following procedures are grouped
by the Engine, (underlined), and then by the machine
model number/s. The machine model numbers are
also in a slightly smaller point size. The first “OL”