Primera Technology RX900 Benutzerhandbuch

Using RFID

If write failures continue even after adjusting the position

of the writer, try adjusting the Antenna Power. First select

Stop Test. Now increase or decrease the power using the

up and down arrows. Click Set to send the setting to the

printer. Try a Writing Test again. After a successful Writing

test you may choose to verify the writing by running a

reading test on the same label/tag.

PRINTING

AND ENCODING

Once you have a successful write test, you are ready to print

from your RFID equipped software program!
Refer to the print-

ing application’s

documentation for

details on RFID

printing. A trial

version of

Bartender is

included on the

installation disc.

To add RFID

encoding to a label design using Bartender, once the

label size

has been chosen and the blank label is on screen, click the

Standard RFID button on the lower left to display all RFID

options. Simply drag the desired data format to the area

around the label. Double click on the icon that appears to set

the data or data source.

Note on Encoding Errors: During printing from any application if an

encoding error appears, the PTStatus monitor will appear and dis-

play an error. It will try to encode again after making calibration

adjustments. If it fails to encode, by default a series of XXXXs will

automatically be printed on the label to indicate that it was not

encoded properly. The job will then continue.

RX900.qxd 2/17/2011 1:28 PM Page 19

TOC

INDEX