Quantum DLT-S4 Betriebsanweisung
Chapter 9 Installing an Internal SCSI Tape Drive
Confirming the Installation
DLT-S4 Product Manual
78
Confirming the Installation
9
To confirm the installation, turn on the host computer.
The screens displayed at power-on contain:
• BIOS
• Operating system
• SCSI controller information
If the first screen displays host adapter and SCSI ID information
The screens displayed at power-on contain:
• BIOS
• Operating system
• SCSI controller information
If the first screen displays host adapter and SCSI ID information
indicating the drive is a Quantum product, then the installation was
successful.
If the installation was NOT successful, see
If the installation was NOT successful, see
Adding an Additional Device
9
Once you have successfully confirmed the installation of your tape drive,
you may add one additional device to the SCSI bus.
1
Ensure that all devices have unique SCSI IDs (see
2
Ensure that the tape drive, host computer, and all peripheral devices
(such as printers) are turned off.
3
Make sure that all the SCSI cables and terminators are SPI-4 (or SPI-5)
compatible.
Note:
Use care when connecting the cables to avoid bending or
damaging the connector pins.
Caution:
Never connect the tape drive while the tape drive,
host system, or peripheral devices are turned on.
Doing so could result in damage to the tape drive or
other peripheral devices.