Cisco Cisco Agent Desktop 8.0 Fehlerbehebungsanleitung
The Test Target NIC is connected to one port of a simple Hub. The Hub is connected to the network backbone
or subnet. You also need a Packet Generator Host that has the ability to generate Ethernet traffic. The Packet
Generator Host is connected to another port on the Hub.
or subnet. You also need a Packet Generator Host that has the ability to generate Ethernet traffic. The Packet
Generator Host is connected to another port on the Hub.
The Packet Generator Host equipment can be either a dedicated packet analyzer, or a computer with
a software−based packet analyzer with capabilities to generate Ethernet traffic.
a software−based packet analyzer with capabilities to generate Ethernet traffic.
There are a good number of software packet analyzers available that can be used for this purpose. For a
comprehensive list of reliable analyzers visit the Cooperative Association for Internet Data Analysis
comprehensive list of reliable analyzers visit the Cooperative Association for Internet Data Analysis
web
site.
Prepare the Test Target
When the environment is set up, load the software tools on the Test Target and Packet Generator Host.
Complete these steps:
Complete these steps:
Download WinPcap
.
1.
Run the Install program for WinPcap.
2.
Create a directory on the Test Target computer, and name it "VLANTest".
3.
Download WinDump.exe
.
4.
Copy the file to the directory you created in step 3.
5.
Open a console window, go to the directory where you copied WinDump.exe.
6.
Determine the MAC address of the Test Target NIC. To do so, execute ipconfig /all at the command
prompt.
prompt.
7.
Write down the number that appears for the Physical Address, as shown in figure 2:
Figure 2 The ipconfig /all Command Output
8.