Cisco Cisco Agent Desktop 8.0 Fehlerbehebungsanleitung
For example, notice the Intel Pro/100 NIC card, the MAC address is 00D059d8f7d9.
Determine the device interface number of the Test Target NIC. Execute windump D.
Determine the device interface number of the Test Target NIC. Execute windump D.
9.
Write down the number of the test NIC (see figure 3).
Figure 3 The Test NIC Number
Notice the interface number 1 that corresponds to the Intel Pro/100 NIC card in figure 3.
Note: If you are not sure which number to pick, repeat the test for each card until the test succeeds for
one (sufficient pass) or fails for all cards.
one (sufficient pass) or fails for all cards.
10.
Start WinDump to monitor the Test Target NIC for incoming VLAN packets. Execute windump i
<device_number> vlan. As shown in figure 4, the device_number is 1.
<device_number> vlan. As shown in figure 4, the device_number is 1.
Figure 4 The Device Number is 1
11.