Cisco Cisco VN 2900 Network Adaptation Interface Installationsanleitung

Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is 
connected, avoid exposure to laser radiation and do not stare into open apertures. Statement 125

Slide the SFP into the housing on the interface card until it is locked into position. (See 

.) The 

SFP is designed to prevent improper insertion.

If the SFP uses a bale-clasp latch (see 

), the bale-clasp handle should be on top of the SFP in 

the closed position for proper seating of the SFP module.

Do not remove the optical port plugs used on the SFP (gray color in the illustration) until you are ready 
to connect cabling to the interface card.

(For optical SFPs) Remove the plugs from the SC connectors on the SFP.

Connect the interface card to the network.

If installing the SFP in an uninstalled interface card, install the interface card (see the 

) before connecting the interface card to the 

network.

To remove a SFP from an interface card, perform the following steps:

Disconnect all cables from the SFP.

Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is 
connected, avoid exposure to laser radiation and do not stare into open apertures. Statement 125

The latching mechanism used on many SFPs locks the SFP into place whenever cables are connected. 
Do not pull on the cabling in an attempt to remove the SFP.

117

3

6

3

GE 0

1GE-SFP

HWIC-

EN

LINK

TX

RX

LASERPR

ODUKT DER KLASSE 1

1

PRODUCT

O LASER CLASE 1

 PRODUIT LASER DE CLASSE 1

CLASS 1 LASER PR

ODUCT