Cisco Cisco IOS Software Release 12.4(22)XR
76
Cisco Packet Data Serving Node Release 5.5 for Cisco IOS Release 12.4(22)XR9
OL-19026-02
Features From Previous Releases
CDMA-related Configuration Commands
For the single IP model, an EXEC banner appears when logging in to a TCOP and warns you to be aware
that “normal” maintenance activities should be run from PCOP.
that “normal” maintenance activities should be run from PCOP.
The
lists the commands that PDSN single IP supports, and indicates whether they are filtered
at the PCOP or also sent to the TCOPs.
If the command is sent to the TCOPs, then it is executed at each of the TCOPs.
Table 14
PDSN Commands for Single IP
Command (Configuration Commands)
Purpose
Used at
cdma pdsn multiple service-flows
[maximum number]
[maximum number]
Enables the multiple flow support. The
maximum number defines the maximum
number of auxiliary A10s that can be
created between PDSN and PCF. The
default number of auxiliary A10s allowed
is 7.
maximum number defines the maximum
number of auxiliary A10s that can be
created between PDSN and PCF. The
default number of auxiliary A10s allowed
is 7.
TCOP
cdma pdsn multiple service-flows qos
subscriber profile
subscriber profile
Enables you to configure the local
subscriber QoS profile. This profile is
used for a MN when subscriber QoS
profile is not downloaded from the AAA
server.
subscriber QoS profile. This profile is
used for a MN when subscriber QoS
profile is not downloaded from the AAA
server.
TCOP
cdma pdsn multiple service-flows qos
remark-dscp [value]
remark-dscp [value]
Enables you to configure the DSCP
remark value to be used for marking when
the data packets from the mobile toward
the Internet do not have the DSCP within
the allowed DSCP value for that mobile.
remark value to be used for marking when
the data packets from the mobile toward
the Internet do not have the DSCP within
the allowed DSCP value for that mobile.
TCOP
cdma pdsn tft reject include error
extension
extension
Includes the error extension in the reject
message when a TFT is rejected.
message when a TFT is rejected.
TCOP
cdma pdsn cac maximum bandwidth
[number]
[number]
cdma pdsn cac maximum
cpu-threshold [number]
cpu-threshold [number]
Enables the call admission control. Use
one of these CLIs to control the CAC
parameters such as bandwidth and CPU.
one of these CLIs to control the CAC
parameters such as bandwidth and CPU.
CPU (memory)
on PCOP
Bandwidth on
TCOP
on PCOP
Bandwidth on
TCOP
cdma pdsn attribute send {f16 | f17 |
f18 | f19 | f20 | f22}
f18 | f19 | f20 | f22}
Forwards the accounting message.
TCOP