Cisco Cisco IOS Software Release 12.4(22)XR

Configuring Prepaid in the PDSN Environment 

Enabling VPDN in a PDSN Environment 

Configuring the Mobile IP FA

Configuring Proxy Mobile IP Attributes Locally

Configuring Mobile IP Security Associations 

Enabling Network Management 

Configuring Always On Service

Configuring A11 Session Updates

Configuring SDB Indicator Marking

Configuring SDB Indicator Marking for PPP Control Packets

Configuring PoD on the PDSN

Configuring Mobile IP Resource Revocation on the PDSN 

Configuring PDSN Accounting Events 

Configuring CDMA RADIUS Attributes 

Host routes are added in general on the TCOPs for the mobile. In case of SingleIP, any ARP request for 
the MIP address lands on the PCOP. To enable PCOP to respond to ARP requests, enable this CLI 
command. This CLI command installs the host route for the mobile on the PCOP when the flow comes 
up, and deletes the host route whenever the flow goes down.

This CLI command is required only when the host routes are not added at the Supervisor for MIP. By 
default, this CLI command is not configured (

):

 lists the clear commands: 

[no] cdma pdsn sm add mobile route

Configures or removes 
configuration of host route 
on the PDSN. 

TCOP

Router# clear cdma pdsn session {all | pcf ip-addr | msid 
octet-stream} {send {all-update | termreq}} 

Clears the session. 

TCOP

Router# clear cdma pdsn statistics 

Clears the RAN-to-PDSN 
interface (RP) or PPP statistics 
on the PDSN.

 TCOP

Router# clear ip mobile binding {all [load 
standby-group-name] | ip-address | nai string ip_address} 

Removes mobility bindings. 

TCOP