Cisco Cisco IOS Software Release 12.4(22)XR

The cdma pdsn multiple service flows qos subscriber profile command takes you to a submode. 

 lists the commands that you can use to configure various parameters in the local subscriber QoS 

profile.

For any configuration command that is filtered, its sub configuration commands are also filtered.

See the 

 section for the below configuration tasks:

Enabling PDSN Services 

Creating the CDMA Ix Interface 

Creating a Loopback Interface 

Creating a Virtual Template Interface and Associating it with the PDSN Application 

Enabling R-P Interface Signaling 

Configuring User Session Parameters 

Enabling HSRP and Configuring Redundancy

Using the Loopback Interface For the PDSN-AAA Server Interface

Configuring Application Tracking to Handle active-active Situation  

Configuring AAA Server in the PDSN Environment

Configuring RADIUS in the PDSN Environment 

Bandwidth [number] 

Configures the maximum aggregate 
bandwidth value.

TCOP

inter-user-priority [value]

Configures inter-user priority parameter.

TCOP

tft-allowed [value]

Configures the allowed number of 
persistent TFTs parameter.

TCOP

link-flow [value]

Configures the maximum service 
connection parameter in service option 
profile.

TCOP

flow-priority [value]

Configures the maximum per-flow 
priority parameter.

TCOP

flow-profile direction {forward | 
reverse | bi-direction} flow-id 
[flow-id]

Configures authorized flow profile IDs for 
each direction.

TCOP

dscp {allowed-class {AF | EF | O} | 
max-class [value] | reverse-marking 
[value]} 

Configures the allowed differentiated 
services markings parameter.

TCOP